MG 65/75

MG65/75	MX75
Chuck size Swing over bed 25.59"/29.53" Swing over carriage 14.17"/18.11" Center distance 39.37"-157.48" Loading cap. Bet. Center (kg) 1600 (3520 lbs) Main moter 40/50 HP option: 50/60 HP Spindle speed 3 group 3-1800 rpm Spindle bore 3.35" Front bearing diameter 5.91" Tailstock taper MT No. 5 Rapid feed speed X=236 Z=354/236 Type of turret H4, V8, H4 + V8 Machine weight (kg) 5000 (11000 lbs) 8000 (17600 lbs)	Chuck size Swing over bed 29.53" Swing over carriage 18.11" Center distance 39.37"-157.48" Loading cap. Bet. Center (kg) 1600 (3520 lbs) Main moter 40/50 HP option: 50/60 HP Spindle speed 2 group 4-1400 rpm Spindle bore 5.71" Front bearing diameter 8.66" Tailstock taper MT No. 5 Rapid feed speed X=236 Z=354/236 Type of turret H4, V8, H4 + V8 Machine weight (kg) 5000 (11000 lbs) 8000 (17600 lbs)
480 mm (18.8") wide with double V ways, this machine is designed for heavy-duty precision turning. Hand controls are conveniently located in the same position as in conventional lathes. Special low-speed with high torque turning operations can be performed with the heavy-duty headstock, consisting of 8 gears. H-4 turrets are provided as standard, with V-8 in front or H-4 in front and V-8 in rear available as options. For heavy shaft work, a built-in rotating tailstock spindle (110 mm [MT#4] or 160 mm [MT#5]) is optional.